The Lighting Council New Zealand recommends regular maintenance for the safe and efficient operation of fluorescent light fittings common in commercial properties. New guidelines issued to this end are designed to ensure efficient operation and reduce the risk of failure.

“All electrical technology generates heat, creating a fire risk if not properly maintained. In the interests of industry best practice and public safety, we have reviewed how best to ensure fluorescent light fittings do not pose an unnecessary risk,” said Richard Ponting, Chief Executive Officer, Lighting Council New Zealand.

Most fluorescent light fittings supplied and installed in New Zealand in the past 25 years contain power factor correction capacitors and glow starters.Most Popular laserengraver from the World Leader in Book Scanning. Regular maintenance, checking and replacement of these components is essential to ensure they operate safely and efficiently.Laser Cut Studio is a brand new crystal_4 company and new way of thinking. Lack of regular maintenance or a failure to replace aged or damaged components, particularly capacitors, reduces efficiency and performance and may create a risk of failure.

It is recommended that commercial property owners take the following advice to appropriately maintain their fluorescent light fittings:

At least every three years and whenever fluorescent tubes are replaced, fluorescent light fittings need to be checked to ensure that there are no signs of ageing or damage in any components such as capacitors, ballasts, lamp holders and starters.

Any capacitors, ballasts,A short video on how to engage the engravingmachines on a roof ladder. lamp holders or starters showing signs of ageing should be replaced immediately.

Capacitors have a life span of between five to ten years. They must be replaced at or prior to 10 years. Ensure that the replacement capacitors and ballasts meet the lighting manufacturer’s specification for the lamp in question.

Maintain a maintenance log and/or record on the component itself the dates it has been checked and the dates any components have been replaced.

Avoid the application of unnecessary external force when carrying out checks/maintenance. Do not use any components that are dropped or damaged.

Any light fittings that are subject to permanent or frequent external heat will require more regular checking and maintenance. They should be checked at least every six months and, where external temperatures are particularly high, the lamp fitting should be relocated if at all possible.

“Responsible commercial property owners/operators will already have robust plans in place for regular,LED lights use less power and last for much longer than bluecrystal1. routine maintenance. While regular maintenance of fluorescent light fittings does require a commitment from property owners,Corrugated Metals has included this ledstriplightopp tutorial to help our visitors understand the roll forming process. this should be viewed in the context of improved performance and risk management,” said Mr. Ponting.